Publications scientifiques
Che Randy Nangah
Autres affiliations : Ministry of Scientific Research and Innovation
Ketcha Joseph Mbadcam
Tagne Guy Merlain
Ndi Julius Nsami
Chongwain Paul Tubwoh
Josepha Foba-Tendo
Journal of Encapsulation and Adsorption Sciences
This study reports on the adsorption efficiency of a natural iron oxide from Mballam-Cameroon in comparison with synthesized goethite to simulta-neously remove cobalt and nickel ions from aqueous solutions. Chemical analysis on the natural iron oxide sample revealed iron as the main element and hematite (58.52%) goethite (19.42%), kaolinite (12.69%) and quartz (7.79%) as the component phases in the iron oxide sample. The iron oxide was found to be microporous (BET surface area 43.27 m2/g) with fairly spherical polydisperse particles. Results show maximum absorption for Co(II) and Ni(II) ions for both adsorbents occurred at an equilibrium contact time of 80 mins, dose rate of 0.1 g/L, and pH = 7. Goethite was slightly more efficient at removing target metal ions with maximal adsorbed quantities at 117.8 mg/g of Co(II) and 100.6 mg/g of Ni(II), and 103.9 mg/g of Co(II) and 85.2 mg/g of Ni(II) ions for natural iron oxide. Equilibrium modelling presented the Freundlich isotherm as the best fit model for both adsorbents and metal ions, indicating heterogeneity of the surface binding sites during adsorption. The pseudo-second order kinetic model was the best-fit model, indicating chemical adsorption between the adsorbent surface and metal ions, hence a good correlation between equilibrium and kinetics. The findings indicate that the efficacy of the natural iron oxide from Mballam is almost equivalent to that of synthetic goethite, validating its applicability for the simultaneous removal of cobalt and nickel ions from aqueous solution.
