Scientific publications
Arlin Bruno Tchamba* (Corresponding author)
Other affiliations: Centre National de la Recherche Scientifique · Ministry of Higher Education and Scientific Research · École Nationale Supérieure de Céramique Industrielle · Institut de Recherche sur les Céramiques · Université de Limoges
J.C. Sofack
Other affiliations: Ministry of Higher Education and Scientific Research
U.C. Melo
Journal of Asian Ceramic Societies
Three types of bauxites containing aluminum hydroxide of 58.1% gibbsite and 19.3% boehmite for BX3, 95.5% of gibbsite for BX55 and 84.5% of gibbsite for BX8 were used with lime at 95% of CaO through solid state sintering in one stage to prepare a refractory clinker at 1550 °C. The powder obtained after grinding the clinker showed in the XRD curves the presence of CaO·2Al2O3 and CaO·TiO2 phases in the cement samples. The density of cement powder varied between 2.95 and 3.17 g/cm3 and the specific area of powder obtained after grinding was between 0.72 and 0.85 m2/g. The properties of hydrated cement, W/C = 0.33, after stabilization of cement components for 48 h at 105 °C were showed by XRD, DTA, DTG and SEM (C3AH6, AH3, CA2 and CaO·TiO2). The Young's modulus of the cement made varied between 35.5 and 39.4 GPa, and these Young's moduli were compared to conventional CA14M cement.
